Basic cutting technique, General, Terms, Cutting

SAFETY INSTRUCTIONS

2 Basic cutting technique

General

•Always use full throttle when cutting!

•Reduce the speed to idle after every cut (running the engine for too long at full throttle without any load can lead to serious engine damage).

•Cutting from above = Cutting on the pull stroke.

•Cutting from below = Cutting on the push stroke.

See the section on ”How to avoid kickback” to find out why cutting on the push stroke increases the risk of kickback.

Terms:

Cutting	=	General term for cutting through wood.
Limbing	=	Cutting limbs off a felled tree.
Splitting	=	When the object you are cutting breaks off
		before the cut is complete.

There are five important factors you should consider before making a cut:

1 Make sure the bar will not jam in the cut.

2 Make sure the log will not split.

3 Make sure the chain will not strike the ground or any other object during or after cutting.

4Is there a risk of kick- back?

5Do the conditions and surrounding terrain affect your safety when working?

Two factors decide whether the chain will jam or the log will split. The first is how the log is supported and the second is whether it is in tension.

In most cases you can avoid these problems by cutting in two stages; from the top and from the bottom of the log. You need to support the log so that it will not trap the chain or split during cutting.

!If the chain jams in the cut:

STOP THE ENGINE! Don’t try to pull the saw free. If you do you may damage the chain when the saw suddenly breaks free. Use a lever to open up the cut and free the bar.

The following instructions describe how to handle most types of situation that you will be faced with when using a chain saw.

Cutting

1 The log is lying on the ground. There is little risk of the chain jamming or the log splitting. However there is a risk that the chain will touch the ground when you finish the cut.

Cut all the way through the log from above. Try not to touch the ground as you finish the cut. Maintain full throttle but be prepared in case the chain snatches.

A If it is possible to turn the log you should stop cutting about 2/3 of the way through.

BTurn the log and finish the cut from the

opposite side.

20 – English

261 specifications

The Husqvarna 261 is a robust and versatile chainsaw designed for professional use, particularly appealing to forestry workers, and those engaged in tree care and maintenance. This model stands out for its balance of power and lightweight design, making it an excellent choice for those who need a reliable tool for extended use.

One of the standout features of the Husqvarna 261 is its efficient 50.1cc engine, which delivers impressive cutting performance while maintaining low fuel consumption. This model incorporates a X-Torq engine technology that reduces emissions, making it an environmentally friendly option that complies with stringent regulations. Users can benefit from increased torque over a wide RPM range, resulting in optimal cutting performance even in tough conditions.

Another significant characteristic of the Husqvarna 261 is its LowVib technology. This system effectively reduces vibrations, allowing operators to work longer with minimal fatigue. The ergonomic design of the chainsaw, combined with a comfortable grip, further enhances user control and reduces strain during operation.

Safety is a priority in the design of the Husqvarna 261. It is equipped with an inertia chain brake that stops the chain immediately in case of kickback, protecting the user from potential injury. The chainsaw also features an adjustable oil pump, allowing for precise lubrication of the chain according to the user's specific needs, thus prolonging the life of both the chain and the guide bar.

The air filtration system is another key feature that sets the Husqvarna 261 apart. The innovative design includes a three-piece air filter that effectively keeps dust and debris from entering the engine, ensuring long-lasting performance and reduced maintenance. Furthermore, the quick-release cover allows for easy access to the air filter and spark plug, simplifying routine maintenance tasks.

Overall, the Husqvarna 261 combines advanced technology with user-friendly features, making it a standout choice for professionals who require reliability and performance. Its robust design, coupled with safety features and efficient engine technology, ensures that it can handle the demanding tasks across various cutting applications, establishing it as a preferred tool in the chainsaw market. Whether for logging, landscaping, or general tree work, the Husqvarna 261 is engineered to meet and exceed the expectations of discerning users.

Husqvarna 261 manual Basic cutting technique, General, Terms, Cutting

Models: 261