MAINTENANCE

Starter

!WARNING!

The recoil spring sits in its tensioned posi- tion in the starter housing and can with careless handling fly out and cause personal injury.

When replacing the recoil spring or the starter cord great care should be exercised. Always wear protective glasses.

Replacing a broken or worn starter cord

• Loosen the bolts that hold the starter against the crankcase and lift off the starter unit.

Pull out the cord approx. 30 cm and lift it out of the cut- out in the starter-pulley’s periphery. Reset the recoil spring by allowing the pulley

to slowly rotate backwards.

Loosen the screw in the centre of the starter-pulley and lift off the pulley. Insert and secure the starter cord in the starter pulley. Wind

on approx. 3 turns of the cord on the pulley. Fit the pulley on the recoil spring so that the end of the recoil spring hooks on the pulley. Fit the screw in the centre of the pulley. Thread the starter cord through the hole in the starter housing and the starter handle. Tie a good knot on the end of the cord.

Tensioning the recoil spring

Lift up the starter cord from the cut out on the pulley and turn the pulley approx. 2 turns clockwise.

NOTE! Ensure the starter pulley can be turned at least a further 1/2 turn when the starter cord is fully extended.

Replacing a broken recoil spring

• Lift up the starter pulley (see section ”Replacing a broken or worn starter cord”). Bear in mind the recoil spring is under tension in the starter housing.

• Dismantle the recoil spring by, with the inside of the starter facing downwards, gently knocking it against the bench. If the spring flies out when fitting, it is wound from the outside towards the centre.

• Lubricate the recoil spring with a thin layer of oil. Fit the starter pulley and tension the recoil spring.

Fitting the starter

• Fit the starter by first pulling out the starter cord and then placing the starter in position on the crankcase. No slowly release the starter cord so that the pawls grip in the pulley.

• Fit and tighten the screws that hold the starter.

English – 19

Page 19
Image 19
Husqvarna 268K, 272K Starter, Replacing a broken or worn starter cord, Tensioning the recoil spring, Fitting the starter

268K, 272K specifications

The Husqvarna 268K and 272K are exemplary models in the realm of professional-grade brushcutters, celebrated for their power, versatility, and user-focused design. These machines are ideal for both demanding commercial applications and extensive gardening tasks, combining advanced technology with robust performance.

At the heart of the Husqvarna 268K and 272K is a powerful two-stroke engine that ensures high torque and performance. These engines are designed with efficiency in mind, delivering optimal power while minimizing fuel consumption and emissions. The X-Torq technology employed in these models reduces harmful exhaust emissions and increases fuel efficiency, making them an environmentally friendly option without compromising on performance. This innovative engine design allows users to maintain productivity during long hours of operation while being conscious of their ecological footprint.

Both models are equipped with an ergonomic design that enhances comfort during use. The handlebar system features soft-grip grips and adjustable components, allowing operators to customize their setup for maximum comfort and control. This attention to ergonomic detail significantly reduces fatigue during prolonged use, making the 268K and 272K ideal for professional landscapers and groundskeepers who tackle large areas on a daily basis.

In addition to the engine and ergonomic design, the cutting capabilities of these brushcutters are noteworthy. They come with a variety of cutting heads, including both trimmers and brushcutting blades, allowing users to tackle different types of vegetation effectively. The inclusion of a lightweight yet durable cutting head reduces overall weight without compromising on strength, which is crucial for efficiency and ease of use in tough conditions.

Convenience features are another highlight of the Husqvarna 268K and 272K. The easy starting system ensures users can get to work quickly, while the simple fuel and oil filling designs minimize downtime between uses. Maintenance is straightforward, with accessible air filters and other components that allow for quick servicing, ensuring the longevity and efficiency of the machines.

Overall, the Husqvarna 268K and 272K showcase a harmonious blend of power, comfort, and cutting efficiency, making them indispensable tools for professionals and DIY enthusiasts alike. Whether it's clearing dense underbrush or trimming grass in hard-to-reach areas, these brushcutters are engineered to deliver outstanding performance and reliability in every task.