SAFETY INSTRUCTIONS
3 Silencer
Never use a machine that has a defective silencer.
Check regularly that the silencer is secured to the engine body.
If your silencer is fitted with a spark arrest screen then it should be cleaned regularly. A blocked screen leads to the engine overheating with serious damage as a result. Never use a silencer with a defective spark arrest screen.
4 Disc guard for the cutting disc
Never use a defective disc guard or a disc guard that is not fitted correctly.
!WARNING! Check that the cutting disc is fitted correctly and does not show signs of damage. A damaged cutting disc can cause personal injury.
!WARNING! Never use a power cutter with defective safety equipment. The power cutter’s safety equipment should be checked and maintained as described in this Operator’s Manual. If your power cutter does not meet any of these controls you should contact your service workshop.
GENERAL SAFETY INSTRUCTIONS
IMPORTANT INFORMATION!
Do not use the power cutter until you have read the entire contents of this Operator’s Manual.
All servicing, in addition to the points listed in the section ” Control, maintenance and service of the power cutter’s safety equipment” , should be carried out by trained service specialists.
•Use the equipment recommended in the chapter ”Personal safety equipment”.
•Never use the machine when you are tired, under the influence of medicines/drugs or alcohol.
•Do not lend the power cutter to anyone without providing this Operator’s Manual. Ensure the person using the power cutter understands the information in this Operator’s Manual.
Transport and storage
•Store the power cutter under lock and key so that it’s out of reach for children and unauthorised persons.
•Do not store or transport the power cutter with the cutting disc fitted.
6 – English
