
Introduction
Shindaiwa
Shindaiwa’s
IMPORTANT!
The information contained in this owner's/ operator's manual describes units avail able at the time of publication.
Shindaiwa Inc. reserves the right to make changes to products without prior notice, and without obligation to make alterations to units previously manufactured.
Contents | PAGE |
Attention Statements | 3 |
Safety Information | 4 |
Safety Labels | 4 |
Unit Description | 5 |
Specifications | 5 |
Assembly | 6 |
Mixing Fuel | 11 |
Starting the Engine | 12 |
Stopping the Engine | 12 |
Adjusting Engine Idle | 13 |
Checking Unit Condition | 13 |
Shoulder Strap | 13 |
Using the Trimmer (T230) | 14 |
Using the Brushcutter (C230) | 15 |
Maintenance | 16 |
Long Term Storage | 19 |
Blade Sharpening | 19 |
Troubleshooting Guide | 20 |
Emission System Warranty | 22 |
Attention Statements
Throughout this manual are special “Attention Statements.”
WARNING!
A statement preceded by the trian gular attention symbol and the word “WARNING” contains information that should be acted upon to prevent seri ous bodily injury.
CAUTION!
A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent me chanical damage.
IMPORTANT!
A statement preceded by the word “IMPORTANT” is one that possesses special significance.
NOTE:
A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier.
Read and follow this operators manual. Failure to do so could result in serious injury.
Wear eye and hearing protection at all times during the operation of this unit.
Keep bystanders
at least 50 feet (15 m) away during operation.
Beware of thrown or ricocheted objects.
Do not operate this unit with a blade unless the unit is equipped with a
Always wear a harness when operating this unit with a blade. A harness
is also recommended when using trimmer line.
If unit is used as a brushcutter, beware of blade thrust. A jammed blade can cause the unit to jerk suddenly and may cause the operator to lose control of the unit.
IMPORTANT!
The operational procedures described in this manual are intended to help you get the most from unit as well as to protect you and others from harm. These proce dures are guidelines for safe operation un der most conditions, and are not intended to replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your Shindaiwa power tool, or if you do not understand something in this manual, your Shindaiwa dealer will be glad to assist you. You may also contact Shindaiwa, Inc. at the ad dress printed on the back of this manual.
General Safety Instructions
Work Safely
Trimmers and brushcutters operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruc- tion to operate this unit!
WARNING!
Never make unauthorized attachment installations.
WARNING!
Use Good Judgment
NEVER run the engine when transport ing the unit.
NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause serious injury or death.
ALWAYS use the proper cutting tool for the job.
ALWAYS stop the unit immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improp erly installed parts or attachments.
NEVER extend trimming line beyond the length specified for your unit.
ALWAYS keep the unit as clean as practical. Keep it free of loose vegeta tion, mud, etc.
ALWAYS hold the unit firmly with both hands when cutting or trimming, and maintain control at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug wire before performing any main tenance work.
ALWAYS, if a saw blade should bind fast in a cut, shut off the engine imme diately. Push the branch or tree to ease the bind and free the blade.