MAINTENANCE

Needle bearing maintenance

Winter use

The clutch drum is equipped with one of the following chain sprockets:

•Spur sprocket (A) (the chain sprocket is welded on the drum)

•Rim sprocket (B) (exchangeable)

Both versions have built-in needle bearing at the drive shaft, whitch has to be greased regularly (once a week).

NOTE! Use only high quality bearing grease.

A

B

During winter time, powder snow and cold weather can cause running problems, such as:

•Too low engine temperature.

•Icing on the air filter and carburetor.

Therefore some special measures are required:

•Partly reduce the air inlet of the starter and by doing that increase the engine temperature.

•Preheat the intake air to the carburetor by removing the special plug between the cylinder and the carburetor space.

Temperature 0oC (32oF) or colder

Twist the cover flap so that preheated air from the cylinder can enter the carburetor chamber to prevent icing of the filter.

Temperature -5oC (23oF) or colder

When using the saw in cold weather or powder snow conditions you should cover the starter unit with adhesive

Cooling system

To obtain the lowest possible running temperature the saw is equipped with a cooling system.

tape. This reduces the flow of cold air and prevents large amounts of snow from being sucked in.

IMPORTANT! If a special winter kit is assembled or measures are taken to

The cooling system consists of:

1.Air intake on the starter unit.

2.Air guide plate.

3.Fan blades on the flywheel.

4.Cooling fins on the cylinder.

5.Cylinder cowling (supplies cold air over the cylinder).

5

4

3

2

1

increase the engine temperature, a readjustment to normal setting has to be done when the saw is used under normal conditions. Otherwise, there is a risk of overheating, which can cause severe engine damage.

IMPORTANT! Any maintenance other than that described in this manual must be carried out by your servicing dealer.

Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the saw overheating which causes damage to piston and cylinder.

32 – English

Page 31 Page 33
Page 32
Image 32
Husqvarna 288XP, 288XP Lite manual Needle bearing maintenance Winter use, Cooling system, Temperature 0oC 32oF or colder
Page 31 Page 33

281XP, 288XP, 288XP, 288XP Lite specifications

The Husqvarna 288XP is a legendary chainsaw, renowned for its power and performance in the realm of forestry and woodcutting. This heavy-duty saw was designed for professional use, particularly suited for logging and milling tasks. One of its standout features is its high-output 88cc engine, which delivers robust power and exceptional torque. This makes the 288XP ideal for handling large trees and tough cutting jobs, ensuring efficiency and effectiveness in demanding situations.

The chainsaw is equipped with advanced technologies that enhance its performance. Among these technologies is the Air Injection system, which uses centrifugal force to remove large particles before they reach the air filter, promoting better engine efficiency and reducing maintenance needs. Additionally, the 288XP has a state-of-the-art ignition system that ensures easy starting, reducing downtime on the job.

Another noteworthy variant, the 288XP Lite, retains the same powerful engine but is designed with a lighter construction in mind. This makes the saw easier to handle and less fatiguing for extended use, catering especially to professionals who require mobility without sacrificing power.

The Husqvarna 281XP, often considered a sibling to the 288XP, offers slightly less displacement but is equally potent. With its 72cc engine, the 281XP is ideal for a variety of cutting tasks, from felling trees to limbing. It combines an efficient air filtration system with a lightweight design, providing versatility and ease of use for a range of users, from amateurs to seasoned professionals.

All models in the XP series showcase excellent ergonomics, including padded handles and an anti-vibration system, which significantly reduces operator fatigue and increases comfort during prolonged use. The chainsaw's build quality is robust, featuring high-grade materials that withstand the rigors of intensive work environments.

In summary, the Husqvarna 288XP, 288XP Lite, and 281XP are exemplary tools within the professional chainsaw segment. Each model brings unique features and benefits, yet they all share a commitment to power, efficiency, and user comfort. Whether you opt for the powerhouse 288XP or the more maneuverable 281XP, each chainsaw is engineered to deliver superior performance to meet the demands of the toughest jobs.
Top Page Image Contents