TECHNICAL DATA
| 288XP/XP Lite |
Engine |
|
Cylinder volume, cu.in/cm3 | 5,3/87 |
Cylinder bore, inch/mm | 2,1/54 |
Stroke, inch/mm | 1,5/38 |
Idle speed, rpm | 2 500 |
Power, kW/ rpm | 4,5/ 9 600 |
Ignition system |
|
Manufacture | SEM |
Type of ignition system | AM 7 |
Spark plug | Champion RCJ 6Y |
Electrode gap, inch/mm | 0,020/0,5 |
Fuel and lubrication |
|
system |
|
Manufacturer | Tillotson |
Carburetor type | HS 283A |
Fuel capacity, US pint/litre | 1,9/0,9 |
Oil pump capacity at 8500 rpm, |
|
ml/min | |
Oil capacity, US pint/litre | 1,1/0,5 |
Type of oil pump | Automatic |
Weight |
|
Without bar and chain, Lbs/kg | XP: 16,5 /7,5 |
| XP Lite: 16,1 /7,3 |
Chain/bar |
|
Recommended bar lengths, |
|
inches/cm | |
Usable cutting length, |
|
inches/cm | |
Chain speed at max. |
|
power, m/sec | 21,4 |
Pitch, inches | 3/8 |
Thickness of drive link, inch/mm | 0,058/1,5 |
Number of teeth on drive |
|
sprocket | 7 |
Recommended original and replacement bar and chain combinations
The Husqvarna chain saw models 288XP and 288XP Lite are in the ANSI category of saws above 3,8 cu. in. and are not required to comply with low kickback performance requirements. For these Husqvarna models we recommend the following cutting equipment.
288XP
| Guide bar |
| Saw chain |
Length | Pitch | Max nose |
|
inch | inch | radius |
|
|
|
|
|
3/8 | 11T | Husqvarna H42 / S48 / H41 or | |
|
|
| Oregon 73VL / 73LG / 73LP |
|
|
|
|
288XP Lite
| Guide bar |
| Saw chain |
Length | Pitch | Max nose |
|
inch | inch | radius |
|
|
|
|
|
3/8 | 11T | Husqvarna H42 / S48 / H41 or | |
|
|
| Oregon 73VL / 73LG / 73LP |
|
|
|
|
The combinations of power head, bar and chain have been investigated in accordance with the vibration requirements of ANSI B
Note: For the chains above you are free to choose between 0,050" and 0,058" gauge drive link for the corresponding bar, see the table below.
0,058"/1,5mm | H42 | S48 | H41 | 73VL | 73LG | 73LP |
|
|
|
|
|
|
|
0,050"/1,3mm | – | – | – | 72VL | 72LG | 72LP |
|
|
|
|
|
|
|
!WARNING! These chain saw models are capable of severe kickback that could result in serious
injuries to the user. Do not operate these saws unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with significantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting need.
34«*3®Q¦5P¬
– English