MAINTENANCE
Maintenance schedule
Below you will find some general maintenance instructions.
Daily maintenance
•Check the engine oil level and top up if necessary.
•Check throttle trigger and throttle trigger lockout function.
•Check that the stop switch works correctly.
•Check that the cutter does not rotate when the engine is idling.
•Clean the outside of the machine.
•Check that the harness is not damaged.
•Check that the hand guard is not damaged. Replace the guard if damaged.
•Check that the trimmer is properly centered, sharp, and without cracks.
•Check that the trimmer head is undamaged and not cracked. Replace the trimmer head if necessary.
•A
•Check that the blade nut is sufficiently tightened.
•Check that the transport guard for the blade is intact and that it can be secured correctly.
•Check that nuts and screws are tight.
•Check that there are no fuel leaks from the engine, tank or fuel lines.
Weekly maintenance
•Clean the fins on the flywheel. Check the starter and the recoil spring.
•Clean the carburettor area.
•Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to
•Clean the cooling fins on the cylinder and check that the air intake near the starter is not blocked.
•Check that the bevel gear is filled with grease up to 3/4. Use special grease.
•Clean the air filter.
Monthly maintenance
•Clean the fuel tank.
•Clean the outside of the carburettor and the space around it.
•Check fuel hose for cracks or other damage. Change if necessary.
•Change the fuel filter in fuel tank.
•Check electrical wires and connections.
•Replace the spark plug. Check that the spark plug is fitted with a suppressor.
•Change the air filter.
•Check and clean the spark arrestor mesh on the muffler.
•Change the engine oil.
26 – English
