Husqvarna 324RX-Series Technical Data, Technical data, 324Rx, Engine, Ignition system, Weight

TECHNICAL DATA
Technical data
	324Rx
Engine
Cylinder volume, cu.in/cm3	1,53/25,0
Cylinder bore, inch/mm	1,38/35
Stroke, inch/mm	1,03/26
Idle speed, rpm	3100
Recommended max. speed, rpm	11000
Speed of output shaft, rpm	8300
Max. engine output, acc. to ISO 8893, kW/ rpm	0,8 / 7000
Catalytic converter muffler	No
Speed-regulated ignition system	No
Ignition system
Manufacturer/type of ignition system	Ikeda
Spark plug	NGK CMR5H
Electrode gap, inch/mm	0,023/0,6
Fuel and lubrication system
Manufacturer/type of carburettor	Walbro
Fuel tank capacity, US pint/litre	1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg	12,1/5,5
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear, measured	89/97
according to ANSI B175.3-1997, dB(A), min/max:
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s2
At idle, left/right handles, min.:	1,3/1,3
At idle, left/right handles, max.:	1,7/1,6
At max. speed, left/right handles, min.:	3,1/2,6
At max. speed, left/right handles, max.:	5,2/4,1

Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

English – 27