CONTENTS
Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.
Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual.
!WARNING!
Under no circumstances may the design of the machine be modified without the permis- sion of the manufacturer. Always use genuine accessories.
Your warranty does not cover damage or liability caused by the use of
!WARNING!
The inside of the muffler with catalytic con- verter contains chemicals that may cause cancer. Do not contact inside of damaged muffler.
IMPORTANT ENGINE INFORMATION
HUSQVARNA AB HUSKVARNA SWEDEN TWC
THIS ENGINE CONFORMS TO U.S.EPA PH2 AND
CALIFORNIA EMISSON REGULATIONS FOR SMALL OFF-
ROAD ENGINES.REFER TO OPERATOR`S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
THE AIR INDEX OF THIS ENGINE IS 3
THE LOWER THE AIR INDEX, THE LESS POLLUTION
EMISSIONS COMPLIANCE PERIOD: CATEGORY
This engine label certifies that the product has been approved in accordance with American exhaust emissions requirements EPA and CARB II.
The Emissions Compliance Period referred to on th Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet federal and California emission requirements. Category C = 50 hours, B = 125 hours, and A = 300 hours.
List of contents |
|
SYMBOL EXPLANATION |
|
Symbols | 2 |
CONTENTS |
|
List of contents | 3 |
SAFETY INSTRUCTIONS |
|
Personal protective equipment | 4 |
The machine‘s safety equipment | 4 |
Control, maintenance and service of the machine‘s safety |
|
equipment | 6 |
Cutting equipment | 7 |
General safety instructions | 8 |
General working instructions | 10 |
Basic working techniques | 10 |
WHAT IS WHAT? |
|
What is what on the edger? | 12 |
ASSEMBLY |
|
Assembling the loop handlebar | 13 |
Assembling the angle gear | 13 |
Assembling the blade | 13 |
FUEL HANDLING |
|
Fuel mixture | 14 |
Fuelling | 14 |
START AND STOP |
|
Control before starting | 15 |
Start and stop | 15 |
MAINTENANCE |
|
Carburetor | 16 |
Muffler with catalytic converter | 18 |
Cooling system | 18 |
Spark plug | 18 |
Air filter | 19 |
Angle gear | 19 |
Lubricating the flexible drive axle | 19 |
Adjusting the edger‘s cutting depth | 19 |
Maintenance schedule | 20 |
TECHNICAL DATA |
|
21 | |
FEDERAL AND CALIFORNIA EMISSION |
|
CONTROL WARRANTY STATEMENT |
|
Your warranty rights and obligations | 22 |
English – 3
