1

securing clips (2 per connector)

2

memory module

 

 

 

 

NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector.

4. Ground yourself and install the new memory module:

NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.

a.Align the notch in the module edge connector with the tab in the connector slot.

b.Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.

5. Replace the memory module cover.

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

6.Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.

7.Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.

To confirm the amount of memory installed in the computer, click StartHelp and SupportUse Tools to view your computer information and diagnose problemsMy Computer Information.

Back to Contents Page

Page 24
Image 24
Dell D620, PP18L manual Back to Contents