Dell PP18L Removing the Processor Thermal-Cooling Assembly, Dell Latitude D620 Service Manual

Back to Contents Page

Processor Thermal-Cooling Assembly

Dell™ Latitude™ D620 Service Manual

Removing the Processor Thermal-Cooling Assembly

Replacing the Processor Thermal-Cooling Assembly

Removing the Processor Thermal-Cooling Assembly

CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.

1.Follow the instructions in Before Working Inside Your Computer.

2.Remove the hinge cover (see Hinge Cover).

3.Remove the optical drive (see Media Bay Devices).

4.Remove the keyboard (see Keyboard).

5.Remove the coin-cell battery (see Coin-Cell Battery).

6.Remove the palm rest (see Palm Rest).

1 processor thermal-cooling assembly 2 captive screws (4)

NOTE: The processor thermal-cooling assembly may differ in appearance, depending on your computer configuration. However, the removal procedure is the same for all assemblies.

7.Loosen in consecutive order the four captive screws, labeled "1" through "4," on the assembly.

8.Lift the assembly out of the computer.

Replacing the Processor Thermal-Cooling Assembly

CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.

NOTE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.