Husqvarna 395XP, 395XPG KEY , T, O SYMBOLS

KEY

T

O SYMBOLS

2

–

English

Symbols on the mac

hine:

WARNING! Chain saws can be

dangerous! Careless or incorrect use can

result in serious or fatal injury to the

operator or others.

Please read the operator’s manual

carefully and make sure you

understand the instructions before

using the machine.

Always wear:

• Approved protective helmet

• Approved hearing protection

• Protective goggles or a visor

This product is in accordance with

applicable EC directives.

Noise emission to the environment

according to the European Community’s

Directive. The machine’s emission is

speciﬁed in the Technical data chapter

and on the label.

Chain brake, activated (right)

Chain brake, not activated

(left)

Decompression v

alve:

The valve is to

reduce the pressure in the cylinder and

make starting easier. You should always use

the decompression valve when starting the

machine.

Refuelling.

Filling with chain oil

Other symbols/decals on the mac

hine refer to special

certiﬁcation requirements for certain markets.

Symbols in the operator’

s

manual:

Switch off the engine by moving the

stop switch to the STOP position

before carrying out any checks or

maintenance.

Always wear approved protective

gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be

worn.

Refuelling.

Filling with oil and adjusting oil ﬂow.

The chain brake must be engaged

when the chain saw is started.

WARNING! Kickback may occur when

the nose or tip of the guide bar touches

an object, and cause a lightning fast

reverse reaction, kicking the guide bar

up and towards the operator. May

cause serious personal injury.

Contents

Main 395XP 395XPG KEY T O SYMBOLS Symbols on the mac hine: CONTENTS Contents INTR ODUCTION Dear Customer , WHA T IS WHA T? Bef ore using a new chain saw Impor tant Al ways use common sense ont hand guard Chain brake and fr s safety equipment Page Will my hand always activate the chain brake during a kickback? Will my inertia activated chain brake always activate during kickback in the event of a kickback? Will my chain brake always protect me from injury in the event of a kickback? Throttle trigger lockout Chain catcher Cutting equipment General rules Cutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge setting Tensioning the chain Lubricating cutting equipment Page ASSEMBLY Fitting the bar and chain Fitting a spiked bumper FUEL HANDLING Fuel Petrol Two-stroke oil Mixing FUEL HANDLING Fueling Fuel safety Transport and storage Long-term storage STARTING AND STOPPING Starting and stopping A Cold engine Warm engine STARTING AND STOPPING Stopping Before use: General working instructions Basic safety rules , General rules Basic cutting technique Tree felling technique Page Page Freeing a tree that has fallen badly How to avoid kickback What is kickback? Carburettor adjustment Carburettor with movement limiters Function, Basic settings, Fine adjustment Function Basic settings and running in Fine adjustment Carburettor without movement limiters H L Function L Basic settings and running in Fine adjustment Conditions Low speed jet L H Correctly adjusted carburettor Checking, maintaining and servicing chain saw safety equipment Chain brake and front hand guard Throttle trigger lockout Chain catcher Right hand guard Vibration damping system Stop switch Mufer Starter housing Changing a broken or worn starter cord Tensioning the recoil spring Changing a broken recoil spring Fitting the starter Air lter Spark plug Lubricating the bar tip sprocket Needle bearing lubrication Adjustment of the oil pump Cooling system Air Injection centrifugal cleaning Winter use Temperature -5 Fitting the winterising kit Temperature 0 C or colder Maintenance schedule Technical data Guide bar and saw chain combinations Saw chain ling and le gauges EC Declaration of Conformity (Applies to Europe only)