Fuelling, Min 3 m | Husqvarna 395XP specification

FUEL HANDLING

Fuelling

Taking the following precautions, will lessen the risk of fire.

•Do not smoke or place warm objects in the vicinity of the fuel.

•Always shut off the engine before refuelling.

•Slowly open the fuel cap, when filling fuel, so that possible overpressure is slowly released.

•Tighten the fuel cap carefully after fuelling.

•Always move the saw from the fuelling area before starting.

Clean around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter should be changed at least once a year. Contamination in the fuel tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before fuelling. The volume of chain oil and fuel tanks are adjusted to each other. Therefore, always fill chain oil and fuel at the same time.

Min 3 m

(10 ft)

English – 27

Page 27

Image 27

Husqvarna 395XP manual Fuelling, Min 3 m

Contents

101 89 395XP Symbols KEY to Symbols Contents Safety Instructions Chain SAW Safety EquipmentPersonal Protective Equipment Chain brake and front hand guard Throttle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the brake trigger Checking brake band wearChecking the front hand guard Checking the inertia brake release Throttle lock 5 basic rules Cutting Equipment Some terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chain Risk of kickback is increased with a badly sharpened chain Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Sharpening cutting teeth General advice on setting raker clearance Setting the raker clearanceTensioning the chain Never use waste oil Lubricating cutting equipmentChain oil Filling with chain oil Lubricating the bar tip sprocket Checking chain lubricationLubricating the clutch drum bearing Checking wear on cutting equipment What is kickback? HOW to Avoid Kickback General rules Do not let go of the handlesNever use the saw one- handed General Safety Precautions Min m10 ft General Working Instructions Basic safety rules Cutting Basic cutting techniqueGeneral Terms Felling direction Tree felling techniqueSafe distance Limbing Felling Clearing the trunk and preparing your retreat Freeing a Trapped tree General adviceFreeing a tree that has fallen badly = high accident risk Cutting the trunk into logs What is WHAT? Mounting guide bar and chain Assembly Fuelmix Fuel Handling Min 3 m Fuelling Warm engine Start and StopStart Cold engine Carburetor Maintenance Tensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cord Spark plug Adjustment of the oil pumpNeedle bearing maintenance Air filter Winter use Centrifugal cleaning Air InjectionCooling system Heated handles Monthly maintenance Weekly maintenance Daily maintenance 395XP Technical Data Your Warranty Rights Obligations Emission Control Warranty Statement 2000W40