Original instructions 1153177-95 | Husqvarna 395XPG guide

The engine exhaust from this product contains chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

Original instructions

1153177-95

´®z+U1o¶5®¨ ´®z+U1o¶5®¨ 2010-04-19

Image 44

Husqvarna 395XPG manual Original instructions 1153177-95

Contents

395XP 395XPG Symbols in the operator’s manual KEY to SymbolsSymbols on the machine EPA Contents Introduction Dear customer What is WHAT? What is what on the chain saw? General Safety Precautions Before using a new chain saw Machine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guard General Safety Precautions Right hand guard Throttle lockoutChain catcher Stop switch Cutting equipmentVibration damping system Mufﬂer Chain Cutting equipment designed to reduce kickbackBar Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Increased if the depth gauge setting is Adjustment of depth gauge settingTensioning the chain Too large Lubricating cutting equipment Filling with chain oilChecking chain lubrication Chain drive sprocket Needle bearing lubrication Checking wear on cutting equipment Working with the chain AssemblyFitting the bar and chain Fuel Handling Fuel Fuel safety FuelingTransport and storage Long-term storage Starting and Stopping Starting and stoppingCold engine Warm engine Stopping Basic safety rules Working TechniquesBefore use General working instructions General rules Basic cutting technique Terms Limbing Tree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreat Directional cuts Felling cut Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? Cutting the trunk into logs Maintenance Carburetor adjustment Fine adjustment of the idling speed T Correctly adjusted carburetorHigh speed jet H Checking brake band wear Checking the inertia brake release Immediately Mufﬂer Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil spring Air ﬁlter Spark plugLubricating the bar tip sprocket Fitting the starter Adjustment of the oil pump Air Injection centrifugal cleaningWhen making adjustments Needle bearing lubrication Winter use Heated handles Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data Saw chain ﬁling and ﬁle gauges 050/1,3 mm058/1,5 mm 063/1,6 mm Federal Emission Control Warranty Statement Your Warranty Rights and Obligations Emission Controlwarranty Parts List American Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautions Original instructions 1153177-95