Contents | Husqvarna 395XPG, 1153177-95 guide

CONTENTS

Contents
KEY TO SYMBOLS
Symbols on the machine:	2
Symbols in the operator’s manual:	2
CONTENTS
Contents	4
INTRODUCTION
Dear customer!	5
WHAT IS WHAT?
What is what on the chain saw?	6
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw	7
Important	7
Always use common sense	8
Personal protective equipment	8
Machine′s safety equipment	8
Cutting equipment	11
ASSEMBLY
Fitting the bar and chain	17
FUEL HANDLING
Fuel	18
Fueling	19
Fuel safety	19
STARTING AND STOPPING
Starting and stopping	20
WORKING TECHNIQUES
Before use:	22
General working instructions	22
How to avoid kickback	28
MAINTENANCE
Carburetor adjustment	30
Checking, maintaining and servicing chain saw
safety equipment	31
Mufﬂer	33
Starter	34
Air ﬁlter	35
Spark plug	35
Lubricating the bar tip sprocket	35
Needle bearing lubrication	36
Adjustment of the oil pump	36
Cooling system	36
”Air Injection” centrifugal cleaning	36
Winter use	37
Heated handles	37
Maintenance schedule	38
TECHNICAL DATA
Technical data	39
Saw chain ﬁling and ﬁle gauges	40
4 – English

FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND
OBLIGATIONS	41
AMERICAN STANDARD SAFETY
PRECAUTIONS
Safety precautions for chain saw users	43

Image 4

Husqvarna 395XPG, 1153177-95 manual Contents

Contents

395XP 395XPG Symbols on the machine KEY to SymbolsSymbols in the operator’s manual EPA Contents Introduction Dear customer What is WHAT? What is what on the chain saw? General Safety Precautions Before using a new chain saw Machine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Stop switch Cutting equipmentVibration damping system Mufﬂer Bar Cutting equipment designed to reduce kickbackChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Increased if the depth gauge setting is Adjustment of depth gauge settingTensioning the chain Too large Lubricating cutting equipment Filling with chain oilChecking chain lubrication Chain drive sprocket Needle bearing lubrication Checking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fuel Handling Fuel Fuel safety FuelingTransport and storage Long-term storage Starting and Stopping Starting and stoppingCold engine Warm engine Stopping Basic safety rules Working TechniquesBefore use General working instructions General rules Basic cutting technique Terms Limbing Tree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreat Directional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustment Fine adjustment of the idling speed T Correctly adjusted carburetorHigh speed jet H Checking brake band wear Checking the inertia brake release Immediately Mufﬂer Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil spring Air ﬁlter Spark plugLubricating the bar tip sprocket Fitting the starter Adjustment of the oil pump Air Injection centrifugal cleaningWhen making adjustments Needle bearing lubrication Winter use Heated handles Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data Saw chain ﬁling and ﬁle gauges 050/1,3 mm058/1,5 mm 063/1,6 mm Federal Emission Control Warranty Statement Your Warranty Rights and Obligations Emission Controlwarranty Parts List American Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautions Original instructions 1153177-95