Husqvarna 41, 36 manuel dutilisation Maintenance, Tools and materials, Centrifugal cleaning

Maintenance

Tools and materials

The tools and material shown are absolutely essential for routine everyday safe operation and maintenance of a chain saw. T-wrench (A) – This type of wrench or its equivalent should always be carried with your chain saw. The wrench is needed to adjust chain tension which must be correctly adjusted for safer cutting. Small screwdriver (B) – Used for carburetor adjustment.

Files - You need one round file (C) with file gauge (D) to sharpen the cutting teeth of the chain and one flat file (E) and depth gauge tool (F) for filing the depth gauge.

During winter time, powder snow and cold weather can cause running problems, such as:

●Too low engine temperature.

●Icing on the air filter and carburetor.

Air filter “MEDIUM MESH” must be used,

I

I

I

Centrifugal cleaning

Centrifugal cleaning means the following:

All air to the carburetor is carried through the starter. Dirt and dust is centrifuged away by the cooling fan.

IMPORTANT! In order to keep the function of the centrifugal cleaning, a continous maintenance and care must be made.

oClean the air intake to the starter, the fan wings of the flywheel, the space around the flywheel, inlet pipe and

carburetor space.

r