Beforeusing your new chain saw
cRead the Operator’s Manual carefully.
●Check the assembly and adjustment of the cutting equipment (page 6).
●Start the saw and check the carburetor adjustment (page
s Do not start sawing until a sufficient amount of chain oil has reached the chain (page
IMPORTANT! A too lean carburetor adjustment increases the risk of serious engine malfunction. Insufficient air filter maintenance increases the deposits on the spark plug. This can cause starting difficulties. Incorrectly adjusted chain increases the wear and damage on the bar, the drive sprocket and the chain.
You will find one or more of the following warning labels on the saw in black printing on yellow background.
USACAN
\
A WARNINGA
Avoid contact between any object and the guide bar tip. Contact can cause the chain and guide bar to suddenly move upward and backward, which may cause serious injury. Use both hands on the handles. Follow all safety precautions in the operator’s manual. Failure to follow instructions could result in serious
personal injury. |
|
| Husqvarna | 36 |
|
Recomm. for |
|
|
| ||
Chain /Bar length |
|
| / Bar | nose sprocket | |
Husqvarna H30 | / | 16” | I Max | 10 teeth | or |
Huaqvarna H30 | / | 18” | I Max | 10 teeth |
|
Other low kickback | comb. in operator’s |
manual. | / |
. |
/- |
| . |
A | WARNING | A |
Avoid contact between any object and the guide bar tip. Contact can cause the chain and guide bar to suddenly move upward and backward which may cause serious injury. Use both hands on the handles. Follow all safety precautions in the operator’s manual Failure to follow instructions could result in serious personal injury.
Recomm. for |
|
| Huaqvarna | 41 |
| |
Chain / Bar length |
|
| / Bar | nose sprocket | ||
Huaqvarna | H30 | / | 16” | / Max | 10 teeth | or |
Huaqvarna | H30 | / | 18” | / Max | 10 teeth |
|
Other low kickback comb. in operator’s
manual.
\
/->
CAUTION! (bI ATTENTION!
●
For safe operation Pour la securite follow all safety d’operation, observe precautions and tous Ies reglements
instructions in et Iesinstructions operator’smanual. clansIemanuel
de I’utilisateur.
Chainsawscanbedangerous!
Lestron~onneusespauvent@tredangereuses!
Displacementbelow3.8 cubic inches(62.3cc)whichcomplywiththekickbackrequirementsof AmericanNationalStandardsInstitutaB 175.1– 1991.
(
Husqvarna 36
0IJOOIAOOI O MADE IN U.S.A )
SERIAL No-PLATE
Each saw has a nameplate, fixed to the crankcase, with saw model identification and serial number.
On this plate is also the country of manufacturing identified.
Index
Before using your new chain saw | 3 |
|
Safety Precautions | 4 |
|
What is what on the saw | 5 |
|
Technical specification | 5 |
|
Mounting guide bar and chain | 6 |
|
Fuelmix and chain oil | 7 |
|
Start and stop | 8 |
|
Chain brake | 9 |
|
Control and maintenance of the chain brake | 9 |
|
Maintenance and function | 10 |
|
Starter device | 11 |
|
Chain maintenance | 12 |
|
Maintenance |
| |
Carburetor |
| |
Equipment needed | 18 |
|
General working instruction | 3 |
