USING THE AT&T SIM CARD

Inserting the AT&T SIM card

You’ll always need an AT&T SIM card to use your mobile phone. This contains important information about your mobile phone and network. The message “Insert SIM Card“ appears when the AT&T SIM card is not installed. Please take care of your AT&T SIM card and don’t keep it near magnetic and/or electronic devices, as this can interfere with data storage and network operations.

1.Make sure that your device is turned off, and then remove the back cover.

2. Lift the battery out of the device. Slide the tab to unlock.

3.Locate the SIM card slot, then insert the SIM

card with its gold contacts facing down and its cut-off corner facing out the card slot.

4.

5.

Slide the SIM card completely into the slot. Slide the tab to lock the SIM card.

Replace the back cover.

18

Page 19
Image 19
Sharp STX-2 manual Using the AT&T SIM Card, Inserting the AT&T SIM card, Locate the SIM card slot, then insert the SIM