Sharp STX-2 manual Removing the AT&T SIM card, Inserting the microSD CARd

USING THE microSD CARD

REMOVING the AT&T SIM card

1.Make sure that your device is turned off, and then remove the back cover.

2.Lift the battery out of the device.

3.Press down the tab in front of the SIM card slot opening with your finger.

4.Slide the SIM card out from the slot with your

finger. And slide tab.

Inserting the microSD CARd

The microSD card stores sounds, images, photos and videos, music, and other files. To install your microSD card:

1.Make sure that your device is turned off, and then remove the back cover.

2.Locate the microSD card slot on the upper part of the exposed right panel.

3. Insert the microSD card into the slot with its gold contacts facing down until it clicks into place.

4. Replace the back cover.

19