| OPERATION |
|
| 4 |
|
| 1 |
|
| 2 |
|
| 12 | 6 |
|
| 10 |
|
| 7 |
3 |
|
|
|
| 8 |
5 | 11 | 9 |
| ||
|
| Figure 3 |
Control and Equipment Features (Figure 3)
Crank Assembly (1) - Changes the direction of the discharge chute.
Chute Deflector (2) - Changes the distance the snow is thrown.
Discharge Chute (3) - Changes the direction the snow is thrown.
Auger Drive Lever (4) - Starts and stops the auger which propels the snow thrower.
Auger Blades (5) - Cuts through the snow.
Engine Features (Figure 3)
Stop Switch (6) - If equipped, move to the ON position to start the engine.
Ignition Key (6) - If equipped, insert and turn to the ON position to start the engine.
Primer Button (7) - Injects fuel directly into the carburetor for fast starts in cold weather.
Engine Start Button (8) - On electric start models, used to start the engine.
Switch Box (9) - On electric start models, used to attach electrical power cord.
Recoil Starter Handle (10) - Used to manually start the engine.
Choke Control (11) - Used to start a cold engine.
Spark Plug Access Panel (12) - Remove to access the spark plug.
1741506 | 14 |
