Husqvarna 9030PW, 5525PW, 6026PW, 1335PW manual Maintenance Schedule, Action needed

MAINTENANCE SCHEDULE
Maintenance Schedule	Action needed
Each use	• Check water inlet screen and filter.
	• Check engine and pump oil levels. Fill as necessary. Cannot check
	pump oil on the 5525PW.
	• Check gasoline level. Fill as necessary.
After first 5 hours of operation	• Change engine break-in oil. Use SAE30 or 10W-30 detergent
	oil if below 60° F (15.7° C).
After first 50 hours of operation	• Change pump oil. Cannot check or change pump oil on the
	5525PW.
Every 25 hours of operation	• Change engine oil if operating under heavy load or high
	ambient temperature.
	• Remove and clean foam pre-cleaner or foam air filter (if
	applicable). Wash with water and mild detergent. Dry
	thoroughly. Rub with oil and squeeze to distribute oil.
Every 50 hours of operation	• Change engine oil.
	• Replace spark plug.

Each 100 hours of operation or every 3 months

•Clean or replace paper air cleaner cartridge. Tap gently to remove dirt.

•Change engine oil.

Every 500 hours of operation (5 months)

•Change pump oil. Cannot check or change pump oil on the 5525PW.

NOTE: This is a general maintenance schedule. Refer to the Engine operation manual for specific information on your engine.

18 — English