PRE-OPERATION
UNPACKING
Remove the equipment and all parts from the carton. The carton should contain the following.
•One pressure washer (pump, engine, cart base).
•One cart handle assembly.
•One spray gun.
•One lance.
•Two spray tips for Model 5525PW
Five spray tips for Models 1335PW, 6026PW and 9030PW
•One high pressure hose.
•One pack of nuts, bolts, and manuals.
•One bottle of engine oil.
If any parts are missing, Please contact your
Husqvarna dealer.
After unpacking the product, inspect it carefully for any damage that may have occurred during transit. Make sure to tighten fittings and bolts before using the pressure washer.
DO NOT operate the unit if it’s damaged during shipping,
handling, or use. Damage could result in bursting and cause injury or property damage.
ASSEMBLY
Use 1/2” (13 mm) wrench to assemble pressure washer. On model 5525PW use two adjustable or 7/16” wrenches.
1.Slide the handle assembly over the lower legs of the cart base. Use the standard nut and bolt to secure the legs. See Figure 1.
Figure 1 - Assemble Handle
2.On models 5525W and 6026W connect clear plastic hose to hose barb on detergent tank (See Figure 2). On models 1335PW and 9030PW connect to brass barb on pump (See Figure 3).
Figure 2 - Connect detergent hose to detergent tank
Figure 3 - Connect detergent hose to brass barb
3.Secure garden hose (not included) to the inlet connection on pump (See Figures 4 and 5).
Garden Hose
High Pressure
Hose
Figure 4 - Secure garden hose
8 — English
