SAFETY INSTRUCTIONS

2Sharpening your chain and adjusting raker clearance

The risk of kickback is increased with a badly sharpened chain!

AGeneral information on sharpening cutting teeth

• Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be very small. If the chain is very blunt it will not produce any cuttings at all, just wood powder.

It is very difficult to sharpen a chain correctly without the right equipment. We recommend you use a file gauge. This will help you obtain the maximum kickback reduction and cutting performance from your chain.

The following faults will increase the risk of kickback considerably.

A sharp chain eats its way through the wood and produces long, thick cuttings.

The cutting part of the chain is called the CUTTING LINK and this consists of a CUTTING TOOTH (A) and the RAKER LIP (B). The cutting depth is determined by the difference in height between the two.

A

B

• FILE ANGLE TOO LARGE

• CUTTING ANGLE

TOO SMALL

• FILE DIAMETER

TOO SMALL

B Sharpening cutting teeth

When you sharpen a cutting tooth there are five important factors to remember.

FILING ANGLE

CUTTING ANGLE

FILE POSITION

ROUND FILE DIAMETER

FILE DEPTH

1

5

See the ”Technical data” section for information about sharpening your saw chain.

To sharpen cutting teeth you will need a ROUND FILE and a FILE GAUGE. See the ”Technical data” section for information on the size of file and gauge that are recommended for your saw chain.

1Check that the chain is correctly tensioned. A slack chain is difficult to sharpen correctly.

2Always file cutting teeth from the inside face, reducing the pressure on the return stroke.

File all the teeth on one side first, then turn the saw over and file the teeth on the other side.

min 4 mm

(0,16")

3File all the teeth to the same length. When the length of the cutting teeth is reduced to 4 mm (0,16") the chain is worn out and should be replaced.

12 – English

Page 12
Image 12
Husqvarna 55 manual Sharpening your chain and adjusting raker clearance, General information on sharpening cutting teeth

55 specifications

The Husqvarna 55 chainsaw is a robust and reliable tool that has earned its place among both professional loggers and amateur woodcutters. Designed for hard work, this powerful chainsaw boasts a mix of features and technologies that ensure efficiency, durability, and ease of use, making it an excellent choice for a variety of cutting tasks.

One of the standout features of the Husqvarna 55 is its powerful engine. The chainsaw is equipped with a 3.5 horsepower, 2-stroke petrol engine that generates strong power output, enabling it to tackle demanding cutting jobs effortlessly. The engine is coupled with an advanced air injection system that helps to reduce wear and tear, ensuring the longevity of the saw. This design minimizes the amount of dirt and debris that enters the air filter, thus extending the time between filter cleanings and enhancing performance.

Another key characteristic of the Husqvarna 55 is its weight balance and ergonomic design. Weighing approximately 4.2 kg, the saw is lightweight enough for long periods of use without causing significant fatigue. Furthermore, the design incorporates an anti-vibration system that significantly reduces vibrations felt by the user during operation, allowing for greater control and comfort.

The chainsaw showcases a rapid tensioning system, which allows for quick and effortless adjustment of the chain tension without any tools. This feature is particularly helpful for maintaining optimal chain performance and ensuring safety during operation. The Husqvarna 55 also comes equipped with a safety chain brake system that provides additional protection to the operator, reducing the risk of accidents.

In terms of cutting capacity, the Husqvarna 55 features a bar length of typically 16 inches, making it suitable for various applications, from felling small trees to pruning larger limbs. The combination of the engine power, smooth operation, and the quality of the cutting chain results in efficient, clean cuts.

The durability of the Husqvarna 55 is further enhanced with its sturdy construction, featuring a robust chassis that can withstand the rigors of heavy use. Overall, the Husqvarna 55 is an exceptional chainsaw that combines power, comfort, and safety, making it an outstanding investment for those who demand reliability in their cutting tools. Whether you're a seasoned professional or an enthusiastic hobbyist, the Husqvarna 55 is designed to meet your cutting needs with ease and efficiency.