Husqvarna 917.37408 owner manual Table of Contents, Safety Rules

TABLE OF CONTENTS

KOHLER 4-CYCLE ENGINE MODEL NUMBER XT173-3089-EA

Warranty	2	Maintenance	12-15
Safety Rules	2-4	Service and Adjustments	15-17
Product Specifi cations	5	Storage	17-18
Assembly / Pre-Operation	6	Troubleshooting	18-19
Operation	7-12	Repair Parts	38-47
Maintenance Schedule	12

SAFETY RULES

IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing ob- jects. Failure to observe the following safety instructions could result in serious injury or death.

STARTING SYSTEM

PART NO. QTY. DESCRIPTION

14 165 01-s 1 Starter, Recoil (Includes

14 160 01-s, 14 379 01-s,

Recoil Housing, Recoil

Bushing, Recoil Guide Plate,

Recoil Springs, Recoil Pulley,

Recoil Retainer Plate and

AIR INTAKE/FILTRATION

PART NO. QTY. DESCRIPTION

14 083 01-s	1	Element, Air Cleaner
14 096 09-s	1	Cover, Air Cleaner
14 326 04-s	1	Hose, Primer
14 123 05-s	1	Hose, Breather
14 094 13-s	1	Kit, Air Cleaner Base (Primer)
		(Includes 41 037 10-s and

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!!

YOUR SAFETY IS INVOLVED.

WARNING: In order to prevent accidental starting when setting up, transporting, ad- justing or making repairs, always disconnect spark plug wire and place wire where it cannot come in contact with plug.

WARNING: Engine exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

CAUTION: Muffler and other engine parts become extremely

hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

I. GENERAL OPERATION

• Read, understand, and follow all
	instructions on the machine and in the
	manual(s) before starting. Be thoroughly
	familiar with the controls and the proper
	use of the machine before starting.
•	Do not put hands or feet near or under
	rotating parts. Keep clear of the dis-
	charge opening at all times.
• Only allow responsible individuals, who
	are familiar with the instructions, to
	operate the machine.
•	Clear the area of objects such as rocks,
	toys, wire, bones, sticks, etc., which
	could be picked up and thrown by blade.
•	Be sure the area is clear of other people
	before mowing. Stop the machine if
	anyone enters the area.

•Do not operate the mower when bare- foot or wearing open sandals. Always wear substantial foot wear.

•Do not pull mower backwards unless abso- lutely necessary.Always look down and be- hind before and while moving backwards.

•Never direct discharged material toward anyone.Avoid discharging material against a wall or obstruction. Material may richo- chet back toward the operator. Stop the blade when crossing gravel surfaces.

•Do not operate the mower without proper guards, plates, grass catcher or other safety protective devices in place.

•See manufacturer’s instructions for proper operation and installation of accessories. Only use accessories ap- proved by the manufacturer.

•Stop the blade(s) when crossing gravel drives, walks, or roads.

•Stop the engine (motor) whenever you leave the equipment, before cleaning the mower or unclogging the chute.

•Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher.

•Mow only in daylight or good artifi cial light.

•Do not operate the machine while under the influence of alcohol or drugs.

•Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle; walk, never run.

•Disengage the self-propelled mech- anism or drive clutch on mowers so equipped before starting the engine.

•If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibra- tion is generally a warning of trouble.

•Alwayswearsafetygogglesorsafetyglass- es with side shields when operating mower.

II. SLOPE OPERATION

Slopes are a major factor related to slip & fall accidents which can result in severe injury. All slopes require extra caution. If

		Recoil Shoulder Screw)
14 160 01-s	1	Kit, Starter Rope w/Handle
		(Includes Coil Starter Rope,
		Recoil Starter Handle, Recoil
		Starter Handle Retainer and
		Recoil Rope Retainer)
14 379 01-s	1	Kit, Pawl Repair
		(Includes Recoil Springs
		and Recoil Starter Pawls)
M-641060-s	3	Nut, Flanged M6 x 1.0

FUEL SYSTEM

PART NO. QTY. DESCRIPTION

14 227 07-s	1	Cap Assembly, Fuel
		(EVAP Canister)
24 072 06-s	2	Stud M6 x 1.0 x 93
14 853 17-s	1	Kit, Carburetor w/Gaskets
		(Includes 14 041 05-s)
14 065 22-s	1	Tank Assembly, Fuel, EVAP
		(Includes 14 227 07-s)
14 112 02-s	1	Kit, Spacer, with Gasket
14 050 04-s	1	Filter, Fuel
14 237 05-s	2	Clamp, Hose
14 237 01-s	4	Clamp, Fuel Line
25 111 40-s	1	Line, Fuel
		(10"- Cut To Length) (CKY)
NOT ILLUSTRATED:
14 757 01-s	1	Kit, Carburetor Repair
		(Includes 14 041 05-s)

	Air Cleaner Base Gasket)
14 096 51-s 1	Cover, Air Cleaner Base
	(Breather Gas)
M-641060-s 2	Nut, Flanged M6 x 1.2
25 086 145-s 1	Screw, Hex Flange (M6)

ENGINE CONTROLS

PART NO. QTY. DESCRIPTION

14 089 14-s	1	Spring, Governor
		(2800-3300 RPM)
14 089 07-s	1	Spring, Linkage
25 086 166-s 1		Screw, Retangle Head (M6)
14 126 22-s	1	Control Assembly,
		Fixed Speed
14 090 12-s	1	Lever, Governor
M-641060-s	1	Nut, Flanged M6 x 1.0

2 you feel uneasy on a slope, do not mow it.

47