TRACTOR - - MODEL NO. YT16542 (96043002402), PRODUCT NO. 960 43 00-24
ENGINE
KEY | PART | |
NO. | NO. | DESCRIPTION |
1 | - - - - - - | Engine B&S Model No. 31A707 |
2 | 532 13 73-52 | Muffler |
9 | 532 19 43-19 Keeper Belt Engine |
12 | 532 40 19-85 | Pulley Engine |
15 | 532 40 75-45 | Tank Fuel 1.5 |
18 | 532 19 77-25 | Cap Asm |
20 | 532 18 38-97 | Control Throttle |
21 | 532 19 16-11 Screw 10 x 3/4 Single Lead-Hex |
28 | 532 40 11-37 | Fuel Line |
29 | 532 13 71-80 Spark Arrester Kit |
37 | 532 12 34-87 | Clamp Hose |
42 | 810 04 07-00 Washer Lock 7/16 |
45 | 873 51 04-00 Nut Keps Hex 1/4-20 unc |
69 | 532 16 52-91 | Gasket |
79 | 532 19 23-34 Screw Socket 5/16-18 x .75 |
81 | 532 14 84-56 Tube Drain Oil Easy |
82 | 532 18 16-54 | Plug Drain Oil |
84817 06 06-20 Screw 3/8-16 x 1-1/4
85532 17 39-37 Bolt Hex 7/16-20 x 4 x GR5-1.5
90 | 817 00 06-16 Screw 3/8-16 x 1 |
96819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
97817 67 04-12 Screw 1/4-20 x 3/4
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm
For engine service and replacement parts, call the toll free number for your engine manufacturer listed below:
Briggs & Stratton | 1-800-233-3723 |
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi- neers) code J11940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-5). Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of prod- ucts on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, ex- haust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
