2 Getting to know the Wide Format Copy System

Switching on the Scan System

To switch on the Scan System, press the Power On/Off Switch on the back of the Scan System to the On (I) position as shown below. Wait for 30 seconds or until a P is displayed on the status LED.

SCAN SYSTEM

Power Switch

Power Switch for the Scan System

When the Scan System is switched on, the fluorescent lamp inside the Scan System illuminates immediately. If the lamp does not illuminate, refer to the "Problem solving" section of this guide.

Switching on the PUN, YKE or LVX Controller and the Printer (Xerox Wide Format

510Series/721P)

Controller Power Switches

The YKE, PUN, and LVX Controller have their own power switch. First power on the Controller, and then power on the Printer.

YKE and LVX Controller

Power Switch

Wide Format Copy System User Guide

31

Page 37
Image 37
Xerox 5101, 6279 manual Switching on the Scan System, Controller Power Switches, Power Switch for the Scan System