10 Main Menu
8.Press the Next key until CALIBRATION MOTOR is highlighted.
9.Press the Enter key to select CALIBRATION MOTOR. The CALIBRATION MOTOR screen is displayed.
CALIBRATION
MOTOR: OFF
FUNCTION: 
ROTATE
Calibration Screen
10.Press the Previous or Next key to select FUNCTION.
11.Press the Enter key to select FUNCTION.
12.Press the Previous or Next key to highlight the desired function. The choices are GO TO WIDTH, GO TO CALIBRATE, GO TO HOME, FIND HOME, and ROTATE.
13.Press the Enter key to confirm your selection.
14.Press the Previous or Next key to highlight MOTOR.
15.Press the Enter key to confirm your selection.
16.Press the Previous or Next key to highlight ON. The choices are ON and OFF. The requested operation will execute.
If a GO TO or FIND function has been selected, the MOTOR field will be automatically set to OFF when the MOTOR field is once again selected. If the ROTATE function has been selected, the motor will run continuously until you set the MOTOR field to OFF.
NOTE: If the Scan System encounters a failure accessing the calibration motor function, the fourth line of the display will read "FAILURE CODE:" followed by a
17. Press the Exit key to return to the Component Tests menu screen.
Read NVR
The READ NVR option allows the examination of the contents of the
To run the READ NVR diagnostic:
1.Press the Menu key. The MAIN MENU screen is displayed.
2.Press the Next key until DIAGNOSTICS is highlighted.
3.Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displayed.
4.Press the Next key until SCANNER DIAGNOSTICS is displayed.
5.Press the Enter key to select SCANNER DIAGNOSTICS. The SCANNER DIAGNOSTICS menu screen is displayed.
6.Press the Next key until READ NVR is highlighted.
138 | Wide Format Copy System User Guide |
