Xerox 6279, 5101 manual Feature Keys

2 Getting to know the Wide Format Copy System

The XEROX Wide Format Copy System contains Dynamic Background Suppression technology. Dynamic Background Suppression examines a sample of the document intelligently and makes automatic image quality adjustments that yield a good copy even from poor original documents. The document width is automatically detected and the centering of a scanned original for most opaque documents is adjusted. Translucent documents (transparencies, clear film, etc.) in most cases will not be detected.

The Productivity feature was introduced with version 10.0 firmware and requires that a new WIDE FORMat Scan SYSTEM have a new Document Feed-in Tray. Sensors built into the Feed Tray measure the document width without doing a prescan, which increases the document and copy throughput, thereby increasing productivity.

NOTE: Documents must be centered when using the sensors for width detection.

For documents that require additional adjustments to obtain the best copy quality, a variety of image quality and reduction/enlargement settings are available. All of these functions are controlled from the Scan System Control Panel. This Control Panel, which is mounted on top of the Scan System, receives all power and information from the Scan System.

Feature Keys

Print and Copy feature keys are standard for all printers using FreeFlow Accxes 13.0 firmware, except for the Xerox Wide Format 6030/6050 Printer. In the 13.0 firmware, the following feature keys need to be loaded before the features can be used. See the Feature Key instructions and Coupon Exchange screens on the www.xerox.com website.

NOTE: See the Configuration < Features page on Web Printer Management Tool for a list of available Accxes, Printer, and Scanner features. This page lists whether the feature is installed and provides its current status (enabled or disabled).

•Xerox Wide Format Scan System Features:

Scan-to-Net Feature Key – to create an electronic file from a scanned image.

Scan-to-Print Feature Key – to scan, create a preview, and send the scanned image to the printer when the Scan-to-Net feature is present.

Color Enablement Feature Key – allows color scanning when the Scan-to-Net feature is present.

Speed Enhancement Turbo II Feature Key – 4 inches per second (ips) for 36” wide media.

Speed Enhancement Turbo III Feature Key – PUN, YKE, YKE-N, FRX and LVX Controllers only: 7.33 ips in Copy Mode.

•Xerox Wide Format 6030/6050 Printer:

Print Server Enablement Feature Key – Enables print and copy mode for a remote printer.

•Xerox Wide Format Printers:

5D Speed Update Feature Key – Enables updated printer speed from 4D to 5D/minute for the 6204 Printer.

9D Speed Update Feature Key – Enables updated printer speed from 7D to 9D/minute for the 6050A and 6279 Printers.

Additional 2 roll drawer upgrade – 6279.

Additional 2 cut sheet tray upgrade – 18” – 24” maximum size – 6279.

8 Wide Format Copy System User Guide