Xerox 5101, 6279 manual Powering the Xerox 6204 Wide Format Solution On/Off, Powering On the System

Models: 5101 6279

1 176
Download 176 pages 17.96 Kb
Page 43
Image 43

2 Getting to know the Wide Format Copy System

Powering the Xerox 6204 Wide Format Solution On/Off

The following describes the procedure for powering the Xerox 6204 Wide Format Solution with FreeFlow Accxes Print Server on and off.

Powering On the System

1.Move the printer circuit breaker switch up, to the On [ ] position.

2.Move the printer power switch to the On [ ] position.

Printer Power

Switch

Circuit Breaker

3. Press the power button on the front of the controller.

Power Button

The power button lamp will illuminate. After about one-half minute, the control panel will display the message Printer Warming Up. The machine will be print-ready in about three minutes.

CAUTION: Powering down the system incorrectly may result in data corruption and a service call. The system shutdown procedure below allows the controller to power down correctly. Shutdown is best performed through the Web Printer Management Tool or the control panel’s System Administration menu’s [Shutdown] feature. Only authorized persons should power down the system fully.

Powering Off the System

1.Ensure that all jobs have finished processing, and that the <Transmitting> indicator on the control panel is not illuminated.

2.Select [Shutdown] from either the control panel or the Web Printer Management Tool.

From the control panel

1.Select the <Log In/Out> button and enter the System Administration password.

2.Select the [Shutdown] button. The [Power Off] screen will display briefly on the control panel, and then the control panel and the printer will shut down.

Wide Format Copy System User Guide

37

Page 43
Image 43
Xerox 5101, 6279 manual Powering the Xerox 6204 Wide Format Solution On/Off, Powering On the System, Powering Off the System