12 Cleaning and Maintenance – Scan System
The following illustration depicts the Scan System components that require cleaning.
D
CE
B
A
A: Platen Glass | D: Document Drive Rolls (front) |
B: Backer Roll | E: Document Feed Tray |
C: Document Drive Rolls (rear) |
|
Cleaning the Platen Glass, Document Drive Rolls, and Backer Roll
Perform the following steps daily:
1.Open the Top Cover.
2.Dampen a clean,
3.Wipe the Platen Glass with the towel.
4.Visually inspect the Platen Glass to ensure that all dirt, glue, and other residue have been removed.
5.Place a small amount of the cleaning fluid on the towel and clean the front and rear Document Drive Rolls. Rotate the Rolls as you clean them to ensure that the entire roll surface is clean.
6.Place a small amount of the cleaning fluid on the towel and wipe the white Backer Roll.
NOTE: The Backer Roll is located on the underside of the Top Cover. The Backer Roll may rotate as you clean it. This is normal behavior.
7. Close the Top Cover.
146 | Wide Format Copy System User Guide |
