8 Special Feature Keys
NOTE: You can replace the contents of a used location with the current job settings information. If you choose a location that already contains information, the TEMPLATE IS IN USE screen is displayed as shown below. Press the Enter key to overwrite the contents. Press the Exit key to cancel the operation.
TEMPLATE IS IN USE
PRESS ENTER TO OVERWRITE
EXIT TO ABORT
Template is in Use Screen
8. Press the Enter key to return to the READY screen.
Recalling Job Templates
The RECALL TEMPLATE option allows you to recall job parameters that were previously saved as templates and use them for the current job.
To recall a template:
1.Press the Store/ Recall key. The STORE/RECALL menu screen is displayed.
2.Press the Next key to highlight JOB TEMPLATES.
3.Press the Enter key to select JOB TEMPLATES. The JOB TEMPLATES menu screen is displayed.
4.Press the Enter key to select RECALL TEMPLATE. The RECALL TEMPLATE screen is displayed. The storage locations that actually contain templates are shown. Locations that do not contain a template are not shown.
RECALL TEMPLATE
TEMPLATES IN USE: | 1 |
ENTER TEMPLATE NUMBER
2 | 3 | 4 | 5 |
0 |
|
|
|
Recall Template Screen
5.Use the numeric keypad to enter the location of the template to be recalled.
6.Press the Enter key to confirm your choice. A recall confirmation screen is displayed. The associated template is recalled and the Scan System Control Panel settings are configured accordingly.
JOB PARAMETERS RECALLED
PRESS ENTER TO CONTINUE
Job Parameters Recalled Screen
Wide Format Copy System User Guide | 73 |
