Xerox 5101, 6279 Change Password RE-ENTER NEW Password, Security Settings Image Recall Enabled

10 Main Menu

NOTE: The valid range for passwords is 0 - 65535. If the existing password or an invalid password is entered, an error message will be displayed. The new password must be entered again.

8.Press the Enter key to confirm the new password. The CHANGE PASSWORD screen will instruct you to re-enter the new password.

CHANGE PASSWORD

RE-ENTER NEW PASSWORD:

Change Password – Re-Enter Password Screen

9.Use the numeric keypad to re-enter the new password. The password will display as asterisks.

10.Press the Enter key to confirm the re-entry. You will be returned to the SYSTEM ADMINISTRATION menu screen. The new password is now effective. The old password is no longer valid.

Security Settings

Scan-to-FTP: Scanned images can be transferred to 16 remote FTP destinations. The scanned images are not stored on the Controller’s hard drive. The FTP feature is located on the Sample Mode screen.

Scan-to-Net: At most installations, users have the ability to recall the last image scanned (that was not sent to an FTP destination) and all the settings associated with that image. The recalled image can then be printed without the need to scan from the original document.

Security concerns at certain installations, however, might require that the image recall feature be disabled. The SECURITY SETTINGS option of the System Administration menu allows the system administrator to enable or disable the image recall feature. The default setting is

ENABLED.

To enable/disable the image recall feature:

1.Select the Menu key.

2.Access the SYSTEM ADMINISTRATION menu.

3.Press the Next key until SECURITY SETTINGS is highlighted.

4.Press the Enter key to select SECURITY SETTINGS. The SECURITY SETTINGS screen is displayed.

SECURITY SETTINGS

IMAGE RECALL: ENABLED

Security Settings Screen

Wide Format Copy System User Guide 123