ASSEMBLY
BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER
Some tractor models may need minor modifications before you can mount the grass catcher to the tractor. Look carefully at the mower deck on your tractor and compare the deck mandrel to the illustrations below. If your mower deck mandrel looks like STYLE "A", your tractor is ready - proceed with the grass catcher assembly. If your mower deck mandrel looks like STYLE "B", go to the PREPARATION section in this manual.
DECK MANDREL | DECK MANDREL | |
STYLE "A" | ||
STYLE "B" | ||
|
PARTS IDENTIFICATION
UPPER CHUTE
COVER
DUMP
BAG INDICATOR
GRASS CATCHER CONTAINERS
|
|
|
|
| is |
|
|
|
|
| .Containerwhen. |
|
|
|
|
| lyis nstalled. Replacecontainer |
|
|
| is | properfrequently | |
|
|
| k bag | replacement | |
| wer |
| container. Chec |
|
|
| iorationa recommended |
| |||
|
| unless |
|
|
|
| ate mo detier only |
|
| ||
ARNINGoper and . Use |
|
|
| ||
Wnot | to wear |
|
|
|
|
Do | or damaged |
|
|
|
|
subjectked |
|
|
|
|
|
crac |
|
|
|
|
|
CHUTE LATCH
|
|
|
|
| is |
|
|
|
|
| .Containerwhen. |
|
|
|
|
| lyis nstalled. Replacecontainer |
|
|
| is | properfrequently | |
|
|
| k bag | replacement | |
| wer |
| container. Chec |
|
|
| iorationa recommended |
| |||
|
| unless |
|
|
|
| ate mo detier only |
|
| ||
ARNINGoper and . Use |
|
|
| ||
Wnot | to wear |
|
|
|
|
Do | or damaged |
|
|
|
|
subjectked |
|
|
|
|
|
crac |
|
|
|
|
|
| LOWER CHUTE |
| ATTACHING |
LOWER CHUTE | WING NUT |
|
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position.
| (1) 3/8" Wrench | (1) Drive Ratchet | |
THESE ARE THE TOOLS YOU WILL NEED TO | (1) 1/2" Wrench | (1) 3" or longer Extension | |
(2) 9/16" Wrenches | (1) Short Handle | ||
ASSEMBLE YOUR GRASS CATCHER: | |||
(1) 1/2" Socket | Phillips Screwdriver | ||
| |||
| (1) 9/16" Deep well Socket |
| |
|
|
|
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•Depress clutch/brake pedal fully and set parking brake.
•Place gearshift/motion control lever in neutral (N) position.
• Place attachment clutch in "DISENGAGED" position.
•Turn ignition key "OFF" and remove key.
•Make sure the blade and all moving parts have completely stopped.
•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
6