Kawasaki 840055 Removing / Attaching Battery Pack, Charging Battery Pack, Charger, Assembly

REMOVING / ATTACHING BATTERY PACK

REMOVE BATTERY PACK: 1. Press both release

buttons on either side of the Cordless

When the battery pack requires recharging, a 3-5 hour charge allows the tool to operate at full power. A charging indicator light on the charger will illuminate to show that charging is taking place.

CHARGING BATTERY PACK

Jigsaw to release the battery pack.

2. Pull battery pack free of	RELEASE
Cordless Jigsaw.
	BUTTON

ATTACH BATTERY PACK:

1.Align the raised portion of the battery pack with the

groove in the battery compartment of the Cordless Jigsaw.

2.Press the battery pack into place. Make sure the latches are securely fastened. Do not use the Cordless Jigsaw if the battery pack is not seated properly.

CHARGER

CHARGE BATTERY PACK:

1.Make sure the trigger on the Cordless Jigsaw is in the “OFF” position and remove the battery pack from the Cordless Jigsaw.

2.Plug 120V AC Adapter into household outlet and into side of battery charger. Insert battery pack into battery charger. When the battery is placed in the charger, the red LED indicator light will remain on.

BATTERY PACK

120V AC

ADAPTER

LED LIGHT

BATTERY

CHARGER

Before using battery charger, please read carefully all instructions and cautionary markings on battery charger, battery pack and product using battery.

The charger will not automatically turn “OFF” when the battery pack is fully charged. The charging indicator light will remain “ON” until the charger is disconnected from the electrical outlet.

Use only the charger which accompanied your product or direct replacement as listed in this manual. Do not substitute any other charger. Use only Alltrade approved chargers with your product.

Do not disassemble charger.

Do not use charger if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.

The battery pack and charger heat during charging. Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack.

3.When fully charged, reattach battery pack onto Cordless Jigsaw, making certain latches fasten securely. Cordless Jigsaw will not operate properly if the battery pack is not seated properly.

ASSEMBLY

Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet. Always turn the switch “OFF” and remove the battery pack before changing blades.

ATTACHING THE BLADE

Always remove battery pack before installing or removing blade.

When removing the blade from the tool, avoid contact with skin and use proper protective gloves when grasping the blade or accessory. Accessories may be hot after prolonged use.

11 12