Kawasaki 840055 instruction manual Control Features, Depth, RIP Fence Lock Knob

CONTROL FEATURES: BATTERY

BEVEL LEVELING KNOB

This knob controls the beveling of your cut.

DEPTH

ADJUSTMENT KNOB This knob controls

your cut.

				Before using battery pack, please read carefully all instruc-
				tions and cautionary markings on battery pack, battery
				charger and product using battery.
			®	Do not incinerate the battery pack even if it is severely
				damaged or is completely worn out. The battery pack can
				explode.
			Do not carry battery packs in aprons, pockets, or tool boxes, product kit
the	depth	of	boxes, drawers, etc. with loose metal objects. Battery pack terminals could
			be short circuited causing damage to the battery pack, severe burns or fire.
			The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic
			material by the Environmental Protection Agency. Before disposing of dam-
			aged or worn out Ni-Cad battery packs, check with your State Environmental
			Protection Agency to find out about special restrictions on the disposal of these
			battery packs, take them to your local recycling center for proper disposal, or
			call 1-800-822-8837.

BLADE SAFETY LOCK BUTTON

This button locks the blade in position and prevents it from moving.

RIP FENCE

The scaled rip fence guides the saw to cut exactly along the edge of work piece, making straight and accurate parallel cuts.

RIP FENCE LOCK KNOB

This knob secures the rip fence in place.

11

The battery is not fully charged. Before first use, the battery pack requires 8-10 hours charge time to be fully charged. Subsequent recharging needs 3 hours for the battery to be fully charged.

Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life.

Never over-discharge a battery by using the tool even after tool performance has decreased. Do not attempt to discharge a tool’s battery by continuing to pull on the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance.

Charge battery pack at ambient temperatures between 50° F – 104° F.

Store tool and battery pack in locations where temperatures will not exceed 120°F. This is important to prevent serious damage to the battery cells.

The battery pack should always be recharged when the Cordless Circular Saw begins to run slowly.

When battery pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or fire.