![](/images/new-backgrounds/1302026/30202685x1.webp)
MAINTENANCE AND CLEANING
Always remove the battery pack before attempting cleaning or maintenance.
This Circular Saw is lubricated before it leaves the factory. This lubrication should last for the life of the tool. No further lubrication is required.
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.
Always clean the battery pack using only a dry cloth. Do not use liquids.
Always unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth.
Inspect all mounting screws regularly. Tighten any loose screws. Failure to keep the mounting screws tight could result in serious injuries.
Never open the Cordless Circular Saw case, battery pack or charger. Do not attempt to repair the Cordless Circular Saw, battery pack or charger yourself. Opening any of these parts will void your warranty.
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
Always attach grounded
If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experi- ence a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table on next page).
19
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
TOOL CURRENT RATING |
|
| CONDUCTOR SIZE IN A.W.G |
| ||
AMPERE | 10FT. |
| 25FT. | 50FT. | 100FT. | |
18 |
| 18 | 18 | 18 | ||
18 |
| 18 | 18 | 16 | ||
18 |
| 18 | 18 | 14 | ||
16 |
| 16 | 14 | 14 | ||
14 |
| 12 | 12 | - | ||
12 |
| 12 | 12 | - | ||
|
|
|
|
|
| |
| SPECIFICATIONS |
|
| |||
|
|
|
|
|
| |
SPECIFICATIONS |
|
|
|
| ||
Voltage | 19.2V |
|
|
|
|
|
|
|
|
|
| ||
Switch | On/Off Switch |
|
| |||
Charger Input | 120V |
| 60Hz |
|
| |
Charging Time | Approx. |
|
| |||
No Load Speed (RPM) | 3700/Min. |
|
| |||
Blade Diameter | 140mm |
|
| |||
Battery Type |
|
|
|
|
PROTECTING THE ENVIRONMENT
BATTERIES
Alltrade batteries can be recharged many times. At the end of their useful life, recycle batteries with due care for our environment.
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at
Cordless Drills/Screwdrivers | Angle Grinders |
Impact Wrenches | Reciprocating Saws |
Sanders | Routers |
Jigsaws | Rotary Tools |
Circular Saws | Corded and Cordless |
| Wide Range of Accessories and more |