Husqvarna CL36A manual CHUTE LATCH ASSEMBLY See Fig Use Hardware - - GROUPS E & F, Assembly

DUMP BAG

INDICATOR

FIG. 9A

ASSEMBLY

8 CHUTE LATCH ASSEMBLY

(See Fig. 8)

Use Hardware - - GROUPS "E & F"

•Assemble latch pin to upper chute, as shown.

•Press weld nut into rubber latch and assemble rubber latch to lower chute, as shown.

•Tighten all hardware securely.

ALIGNMENT

SLOT

LATCH PIN

#10 x 1-1/8" SCREW

WASHERS

3/16 x 3/4 x 16 Ga.

RUBBER LATCH

	SPLIT
	SPACER
UPPER
CHUTE	ACORN NUT
#10 x 5/8"	RUBBER
SCREW	LATCH

LOWER CHUTE

WELD

NUT

WASHER

3/16 x 3/4 x 16 Ga.

LOCK WASHER

FIG. 8

9	UPPER CHUTE (See Figs. 9A & 9B)
	No hardware required

•Lower mower deck to its lowest cutting position.

•Assemble upper chute by inserting curved end into hole in back of cover.

NOTE: Handle carefully so as not to damage dump bag indicator.

•Push in and turn upper chute until it is in line with lower chute.

•Align the bosses on lower chute with alignment slots on upper chute and slide together.

•Secure with rubber latch by hooking hole in latch over

BOSSES

FIG. 9B

10 LEVEL MOWER DECK No hardware required

•Be sure deck is properly leveled for best mower perfor- mance. See your tractors owner's manual for instruc- tions.

latch pin.

COVER

HANDLE

UPPER

CHUTE

LOWER CHUTE

10