6

AB

Eng Adjustment of the cutting unit

A. In the direction of travel

1.Check that the air pressure is correct in all four tires.

2.Make sure that the machine is on a horizontal surface.

3.Lift up the cutting unit to its highest position.

4.Measure the distances A and B.

Einstellung des Mähaggregats

A. In Fahrrichtung

1.Prüfen, daß der Luftdruck an allen vier Reifen richtig ist.

2.Prüfen, daß die Maschine auf einer ebenen Unterlage steht.

3.Mähaggregat in die oberste Lage anheben.

4.Abstände A und B messen.

2 1

Eng To achieve best cutting results the cutting unit’s front edge (B) should be about 10 mm (0.375") lower than the back edge

(A). Adjust in the following way to raise the back edge:

1.Loosen the nut (1) on both the left and right levers.

2.Screw the nut (2) the same number of turns on both levers.

3.When the correct distance (A) is obtained this setting is locked with the nut (1).

Für bestes Mähergebnis muß die Vorderkante des Mähaggregats (B) ca. 10 mm tiefer liegen als die Hinterkante

(A). Einstellung zur Erhöhung der Hinterkante:

1.Mutter (1) am linken und rechten Hebel lösen

2.Mutter (2) gleich viele Drehungen an beiden Hebeln verstellen.

3.Wenn der richtige Abstand (A) erhalten wird, sind die Einstellungen mit der Mutter (1) zu sperren.

FPour avoir le meilleur résultat de coupe, le bord avant du carter de coupe (B) doit être de 10 mm en dessous du bord arrière (A). Pour relever le bord arrière, procéder de la façon suivante:

1.Dévisser l’écrou (1) sur les supports avant gauche et droit du carter de coupe.

2.Visser exactement de la même façon les écrous (2) sur

les supports avant du carter de coupe

3. Lorsque la distance (A) est correcte, bloquer le réglage

 

avec l’écrou (1).

76

 

FRéglage du carter de coupe

A. Reglage lateral

1.Vérifier que la pression est correct dans les quatre pneus.

2.S’assurer que la machine est sur un terrain plat.

3.Relever le carter de coupe dans la position la pus haute.

4.Mesurer les distances A et B.

Esp Ajuste de la unidad de corte

A. En el sentido de la marcha

1.Controlar que la presión de inflado es la correcta en los cuatro neumáticos.

2.Asegurarse de que la máquina está sobre suelo horizon- tal.

3.Levantar la unidad de corte hasta su posición más elevada.

4.Medir la distancia A y B.

Regolazione del tagliaerba

A. Nel senso di marcia

1.Controllare la pressione dei pneumatici.

2.La macchina deve essere in piano.

3.Sollevare al massimo il tagliaerba.

4.Misurare le distanze A e B.

NL Het instellen van de maaikast

A. In de rijrichting

1.Controleer of de luchtdruk in alle vier de banden juist is.

2.Zorg ervoor dat de machine op een vlakke ondergrond staat.

3.Zet de maaikast in de hoogste stand.

4.Meet de afstanden A en B.

Esp Para obtener el mejor resultado de corte, el extremo delantero

(B)de la unidad de corte ha de estar unos 10 mm (0,375") más bajo que el extremo posterior (A). Ajustar de la manera siguiente para elevar el extremo posterior:

1.Quitar la tuerca (1) en las palancas izquierda y derecha.

2.Enroscar la tuerca (2) el mismo número de vueltas en las dos palanca.

3.Cuando se ha obtenido la distancia correcta (a), el ajuste se bloquea con la tuerca (1).

Per ottenere i migliori risultati, il bordo anteriore del tagliaerba

(B)deve essere circa 10 mm più basso di quelo anteriore (A). Regolare nel modo sequente:

1.Allentare il dado (1) sui bracci destro e sinistro.

2.Avvitare il dado (2) di un nuemero identico di giri sui due bracci.

3.Dopo aver raggiunto la distanza corretta (A) bloccare stringendo il dado (1).

NL Om het beste maairesultaat te bereiken, dient de voorkant (B) van de maaikast ca. 10 mm (0,375") lager te staan dan de achterkant (A). Ter verhoging van de achterkant als volgt instellen:

1.Draai moer (1) los op linker en rechter hefboom.

2.Draai moer (2) op de beide hefbomen evenveel slagen.

3.Wanneer de juiste afstand (A) is bereikt, wordt de instelling met de moer (1) vastgezet.

Page 76
Image 76
Husqvarna CTH200 Eng Adjustment of the cutting unit, Einstellung des Mähaggregats, Réglage du carter de coupe

CTH200 specifications

The Husqvarna CTH200 is a powerful and versatile garden tractor designed to handle a variety of tasks with ease. Engineered for homeowners who value performance and durability, the CTH200 stands out with its robust build quality and advanced features that enhance usability and comfort.

At the heart of the CTH200 is a reliable and efficient engine. Featuring a Kohler 6000 Series engine, this tractor delivers impressive power and torque, ensuring optimal performance for mowing, towing, and other heavy-duty tasks. The engine is designed for increased fuel efficiency, allowing you to tackle your gardening duties without frequent refueling.

One of the standout features of the Husqvarna CTH200 is its cutting system. The tractor is equipped with a 42-inch cutting deck that provides a wide cutting swath, enabling faster mowing of larger lawns. The cutting deck is adjustable, allowing users to customize the cutting height to suit their preferences and specific lawn conditions. The innovative Air Induction Mowing Technology enhances airflow within the deck, resulting in a clean, even cut every time.

User comfort is a priority in the design of the CTH200. The fully adjustable ergonomic seat ensures that operators can find their ideal driving position, reducing fatigue during longer tasks. The easy-to-use control layout makes operating the tractor intuitive, allowing users to focus on the job at hand instead of fumbling with controls.

Another significant aspect of the CTH200 is its maneuverability. With a tight turning radius, this garden tractor can easily navigate around obstacles in your garden or yard. Additionally, the stamped steel cutting deck is both durable and lightweight, contributing to both ease of use and longevity.

For added versatility, the Husqvarna CTH200 supports a range of accessories and attachments, including baggers, mulchers, and snow blades. This adaptability makes the CTH200 a year-round tool for lawn maintenance and seasonal tasks, enhancing its value for homeowners.

Safety is also a key consideration, with features like an automatic blade engagement system that stops the blades when the operator leaves the seat. This ensures a higher level of safety, especially when using the tractor in busy family environments.

In conclusion, the Husqvarna CTH200 garden tractor combines power, efficiency, and comfort, making it an ideal choice for homeowners looking for a reliable solution to their lawn care needs. With its advanced features and robust design, it stands as a testament to Husqvarna's commitment to quality and innovation in outdoor power equipment.