Husqvarna EZF 3417/ 965879301 Moving by Hand, Make no adjustments without the engine stopped

operation

IMPORTANT INFORMATION

Before pushing or towing tractor, transmission dump valves must be opened and park brake released. The tractor should never be pulled at more than 2 miles per hour (3.2 km/h) or for distances over ¼ mile (.402 km). Trailer the unit for distances over ¼ mile.

Moving by Hand

WARNING!

Make no adjustments without:

•the engine stopped

•the ignition key removed

•the parking brake activated

When pushing or pulling unit, the hydraulic pump dump valves must be opened

•Always turn off engine before engaging or disengaging the hydro release.

•The hydro release valves are located below the seat, on the front side of the hydro pumps.

•Raise the deck into the highest cutting position.

•Lift the seat frame assembly to access the release valves.

•Use a 5/8" wrench to rotate bolt counter- clockwise two full turns to disengage pump.

•Repeat the procedure for the opposite pump.

•To engage, rotate each pump bolt clockwise until the bolt is snug. Do not overtighten the release valve or damage to the hydro pump could occur.

1

2

8050-767

1.Left hydro pump

2.Release valve Bypass linkages

English-29