Husqvarna FS 700 EX manual What is what

Operator’s Manual FS 700EX

What is what

21

5	11
13
	7

6

	11	9
10		8

34

12

10

1.Trolley feed lever

The machine's propulsion is controlled using this lever. The machine is driven forwards by turning the lever clockwise. When the lever is turned anticlockwise, the machine reverses. When lever is in the neutral position the machine stands still. This function works as soon as the machine is connected to the power and the machine's propulsion is engaged.

2.Blade feed lever

This lever is used to raise and lower the cutting bridge. The blade is fed downwards when the lever is turned anticlockwise. When the required cutting depth is achieved the lever is turned to the neutral position. The blade is raised by turning the lever clockwise. This function works as soon as the machine is connected to the power.

3.Water selector

Turn this knob anticlockwise to open the water valve. Water is led through the blade spindle and out to the blade flange, where the water cools the blade and prevents dust build-up.

4.Start knob

Used to start the blade.

5.Emergency stop

Cuts all power to the machine. No functions can be activated until the emergency stop has been reset. The emergency stop is reset by pulling out the button.

6.Power supply

For connecting an electrical connector of the type: 5-way 400 V/16A

4-way 480V/16 A.

4-way 600V/16A

7.Water connector

Water coolant is connected to the machine here.

8.1-Phase 230V outlet Socket

To connect a 230V tool to the machine.

9.Personel protection

Will cut the power to the 1-phase outlet socket at 30 mA earth fault.

10.Propulsion/Parking brake

When the foot lever is in the illustrated position the drive is engaged. When the foot lever is in this position

8 - English