SERVICE AND ADJUSTMENTS
•From right side of mower, first insert 90° end of
NOTE: Flashlight may be helpful.
TRANSAXLE | |
(S) LOCATION | BRACKET (T) |
LOCATED
BETWEEN REAR
TIRES
| S |
T | S. |
| T. TRANSAXLE BRACKET |
Fig. 31
NOTE: Depending on model, bracket (T) may be differ- ent than shown but hole for
•Pivot the integrated washer end of
•Secure with small washer and small retainer spring as shown.
|
| D. RIGHT SIDE | |
|
|
| REAR MOWER |
| T | S | BRACKET |
| S. | ||
|
| ||
D |
| T. | TRANSAXLE |
|
| BRACKET | |
|
|
| |
Fig. 32
•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring.
•Repeat on opposite side of tractor.
A |
B |
Fig. 33
•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.
•Repeat on opposite side of tractor.
C
D
Fig. 34
•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert threaded rod end of link assembly through front hole in tractor suspension bracket (F).
•Install bushing (O) and loosely install nut (P) and jam nut (Q).
•Insert flared ends of link (E) into slots in front mower bracket (H).
•Check
F |
|
O | P |
| |
E |
|
| Q |
H |
|
Fig. 35
•Install belt onto electric clutch pulley (M).
M
Fig. 36
IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.
•Raise attachment lift lever to highest position.
•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.
See Mower Drive Belt Installation in "TO REPLACE MOWER BLADE DRIVE BELT" in this section of the manual.
22
