Husqvarna HU800AWD Service And Adjustments, To Adjust Cutting Height, Rear Deflector, Lawn Mower

SERVICE AND ADJUSTMENTS

CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See “TO ADJUST CUTTING HEIGHT” in the Operation section of this manual.

REAR DEFLECTOR

The rear defl ector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the defl ector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT (See Figs. 19 & 20)

1.Turn lawn mower on its side with air fi lter and carbure- tor up.

2.Remove blade bolt, lockwasher, hardened washer and blade.

3.Remove debris shield.

4.Remove side bumper.

5.Remove rear baffle.

6.Disconnect return spring from rear baffle / rear gearcase belt keeper.

7.Disconnect cable from rear gearcase.

	SIDE
	BUMPER
REAR
BAFFLE
	DRIVE
	COVER
DEBRIS
SHIELD
BLADE
HARDENED WASHER
LOCKWASHER
BLADE BOLT	FRONT
	BAFFLE

FIG. 19

14