MAINTENANCE
General
WARNING! The user must only carry out the
!maintenance and service work described in this manual. More extensive work must be carried out by an authorized service workshop.
The engine should be switched off, and the stop switch in STOP position.
Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.
The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer.
•Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.
Maintenance schedule
In the maintenance schedule you can see which parts of your machine that require maintenance, and with which intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending on the rate of usage.
Daily maintenance | Weekly maintenance | Monthly maintenance |
|
|
|
Cleaning | Cleaning | Cleaning |
|
|
|
External cleaning |
| Spark plug |
|
|
|
Cooling air intake |
| Fuel tank |
|
|
|
|
|
|
Functional inspection | Functional inspection | Functional inspection |
|
|
|
General inspection | Vibration damping system* | Fuel system |
|
|
|
Throttle lockout* | Muffler* | Air filter |
|
|
|
Stop switch* | Drive belt | Drive gear, clutch |
|
|
|
Blade guards* | Carburetor |
|
|
|
|
Diamond blade** | Starter |
|
|
|
|
Guide rollers |
|
|
|
|
|
Support rollers |
|
|
|
|
|
Drive wheel |
|
|
|
|
|
*See instructions in the section "Machine’s safety equipment".
** See instructions in the section "Blades" and "Assembly and settings".
20 – English
