KEY TO SYMBOLS
Symbols on the machine
WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.
WARNING! Dust forms when cutting, this can cause injuries if inhaled. Use an approved breathing mask. Avoid inhaling petrol fumes and exhaust fumes. Always provide for good ventilation.
WARNING! Kickbacks can be sudden, rapid and violent and can cause life threatening injuries. Read and understand the instructions in the manual before using the machine.
WARNING! Sparks may appear and start a fire when you work with the machine.
Choke
Air purge
Decompression valve
Refuelling, petrol/oil mix
2 – English
You will find the following labels on your power cutter:
The Emissions Compliance Period referred to on the Emission Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal and Californian emissions requirements.
The engine exhaust from this product contains chemical known to the State of California to cause cancer, birth defects or other reproductive harm.
Other symbols/decals on the machine refer to special certification requirements for certain markets.
Explanation of warning levels
The warnings are graded in three levels.
WARNING!
WARNING! Used if there is a risk of serious
!injury or death for the operator or damage to the surroundings if the instructions in the manual are not followed.
CAUTION!
CAUTION! Used if there is a risk of injury to
!the operator or damage to the surroundings if the instructions in the manual are not followed.
NOTICE!
NOTICE! Used if there is a risk of damage to materials or the machine if the instructions in the manual are not followed.
