Husqvarna LOYTH20F42T manual Table Of Contents, Product Specifications, Customer Responsibilities

PRODUCT SPECIFICATIONS

Gasoline Capacity	4 Gallons
and Type:	Unleaded Regular
Oil Type	SAE 10W30 (above 32°F)
(API-SG-SL):	SAE 5W30
	(below 32°F)
Oil Capacity:	W/ Filter:	2.9 Pints
	W/O Filter:	2.2 Pints
Spark Plug:	Champion RC12YC
(Gap: .030")
Ground Speed	Forward: 0-5.8
	Reverse: 0-2.1
Charging System:	15 Amps @ 3600 RPM
Battery:	Amp/Hr:	35
	Min. CCA:	280
	Case size:	U1R

Blade Bolt Torque: 45-55 Ft. Lbs.

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact a qualified service center. We have com- petent, well-trained technicians and the proper tools to service or repair this trac- tor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in main-

taining, caring for and using your tractor.

•Follow the instructions under “Mainte- nance” and “Storage” sections of this owner’s manual.

WARNING: This tractor is equipped with an internal combustion engine and should not be used on or near any unim- proved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark ar- rester for the muffler is available through your nearest service center (See REPAIR PARTS manual).

TABLE OF CONTENTS

Safety Rules	2	Service and Adjustments	20
Product Specifications	5	Storage	27
Assembly/Pre-Operation	6	Troubleshooting	28
Operation	8	Warranty	31
Maintenance Schedule	16
Maintenance	16

5