SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 21)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

FIG. 21

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 22)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

FIG. 22

•If adjustment is necessary, see step in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 23 and 24) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

•If front tip of blade is not 1/8" to 1/2" lower than the rear

02548

BB

FIG. 23

tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

Tighten adjust nut

Loosen adjust

B to raise mower

nut B to lower

02950

mower

 

Loosen jam nut A first

FIG. 24

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

20

Page 19 Page 21
Page 20
Image 20
Husqvarna LT1597 manual To Level Mower
Page 19 Page 21

LT1597 specifications

The Husqvarna LT1597 is a robust riding mower designed for residential lawn care enthusiasts seeking efficiency and ease of use. With its powerful engine, advanced cutting technologies, and ergonomic design, the LT1597 is engineered to tackle a variety of lawn maintenance challenges while delivering exceptional performance.

At the heart of the LT1597 lies a durable engine that provides reliable power and performance. Featuring a Briggs & Stratton V-Twin engine, it ensures a smooth mowing experience with plenty of torque for tackling thick grass and uneven terrains. The engine's design promotes easy starting and minimal maintenance, allowing homeowners to focus more on lawn care and less on mowers.

One of the standout features of the LT1597 is its 97 cm (38-inch) cutting deck, which is optimized for achieving a precise cut over both flat and hilly landscapes. The deck comes equipped with a cutting system that utilizes three blades to produce consistent results while reducing clumping and ensuring a clean finish. Additionally, the cutting height can be easily adjusted, enabling users to customize their mowing height based on the season and lawn health.

Husqvarna integrates advanced technology into the LT1597 to enhance user experience. The mower features an ergonomic steering wheel and comfortable seating, providing a smooth ride even during extended mowing sessions. The dashboard includes easy-to-read indicators that keep track of crucial metrics such as fuel level and engine temperature, helping users stay informed during operation.

Another notable characteristic is the LT1597's maneuverability. With a tight turning radius, it allows users to navigate around flower beds, trees, and other obstacles with ease. The automatic transmission enhances the mowing experience further, providing a seamless transition between speeds and eliminating the need for manual gear shifting.

Safety is a top priority in the design of the LT1597. It includes features such as a safety switch that ensures the mower will stop if the operator leaves the seat, minimizing the risk of accidents. The robust build, combined with reliable components, ensures that the mower is built to last and withstand the demands of regular use.

In summary, the Husqvarna LT1597 stands out as a powerful, user-friendly riding mower, equipped with innovative features that make lawn care effortless. With its reliable engine, versatile cutting deck, ergonomic design, and commitment to safety, the LT1597 is a beneficial investment for those looking to maintain their lawns with professional results.
Top Page Image Contents