CONTENTS OF HARDWARE PACK
Key
(1) Oil Drain Tube
(2) Keys
(1) Hood Scoop(1) Hex Bolt
|
|
| Steering |
|
|
|
| Insert | Extension |
|
|
|
| Lock Washer | Shaft |
|
|
|
|
|
| (1) Seat |
|
Steering |
|
|
|
|
|
Wheel | Steering |
|
|
|
|
|
|
|
|
| |
| Boot | Steering Wheel |
|
| |
|
| (1) Washer | (1) Hex Bolt | ||
Washer |
| Adapter | |||
|
|
|
|
ASSEMBLY
Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping puposes.
When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).
TO REMOVE TRACTOR FROM CARTON
UNPACK CARTON
•Cut along dashed lines on all four panels of carton. Remove end panels and lay side panels flat.
•Check for any additional loose parts or cartons and remove.
BEFORE REMOVING TRACTOR FROM SKID
ATTACH STEERING WHEEL (See Fig. 1)
ASSEMBLE EXTENSION SHAFT AND BOOT•Slide extension shaft onto lower steering shaft.
•Place tabs of steering boot over tab slots in dash and push down to secure.
INSTALL STEERING WHEEL•Position front wheels of the tractor so they are pointing straight forward.
•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.
•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.
•Assemble large flat washer, 5/16 lock washer, 5/16 hex
5