Husqvarna Construction Products N. A.

Corporate Office

17400 West 119th Street

Olathe, Kansas 66061

Tel. 913-928-1000

Fax 913-438-7951

Customer Service: 800-288-5040

Customer Serv. Fax: 800-825-0028

DUST WARNING

Cutting, especially when DRY cutting, generates dust that comes from the material being cut, which frequently contains silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Exposure to excessive amount of such dust can cause:

Respiratory diseases (affecting your ability to breath), including chronic bronchitis, silicosis and pulmonary fibrosis from exposure to silica. These diseases may be fatal;

Skin irritation and rash; and

Cancer according to NTP* and IARC*

*National Toxicology Program / International Agency for Research on Cancer Take precautionary steps

Avoid inhalation of and skin contact with dust, mist and fumes; Wet cut when feasible, to minimize dust;

Wear and ensure that all bystanders wear appropriate respiratory protection such as dust masks designed to filter out microscopic particles. (See OSHA 29 CFR Part 1910.1200)

California Prop 65 Warning:

Use of this product can cause exposure to materials known to the State of California to cause cancer

and/or birth defects or other reproductive harm.

Printed in the USA

Page 48
Image 48
Husqvarna PAC IV-18H, PAC IV-8KM, PAC IV-20H, PAC IV-9W, Pac IV-75E, PAC IV-18BV, PAC IV-16KM, PAC IV-14KC Dust Warning