Maintenance
The effectiveness of the planetary seal can be moni- tored by the simple removal of the planetary motor
/gearbox system by removing the four bolts shown below.
Remove 2 bolts either side.
Inspect for dust build up here
If the planetary seal is working effectively, there should be a very minimal amount of dust observed under the cover of the machine. If there is a
Remove this bolt.
26- English
Remove 2 bolts either side.
Remove this bolt.
Remove cover off motor terminal box.
Remove these bolts.
Lift off machine cover to reveal chain ring and planetary seal.
If planetary seal is worn or needs replacement, contact your Husqvarna Construction Products distributor for a new planetary seal replacement kit.
