Husqvarna Rider 15V2 manual Replacing the air filter, Varning

Models: Rider 15V2

1 55
Download 55 pages 32.47 Kb
Page 28
Image 28

MAINTENANCE

Replacing the air filter

VARNING!

Exhaust system is hot. Allow to cool down. Risk of finger injuries.

If the engine seems to lack power or runs irregularly, the reason may be a clogged air filter.

It is therefore important to replace the air filter at regular intervals (see ”Maintenance schedule” for correct service interval).

1. Remove the air cleaner case from the air cleaner body by pushing down the latches with fingers.

IMPORTANT INFORMATION

Never run the engine with the air cleaner removed.

Filters should not be oiled. They should be assembled dry.

2. Lift out the paper element and the foam element from the air cleaner case.

3.Clean the foam element by washing it in detergent and water.

4. Dry the foam element thorougly.

5. Clean the paper element by tapping gently to remove dust. If the element is very dirty, replace it with a new one.

Always replace the paper element every 200 hours.

6. Reinstall the foam element and the paper element into the air cleaner case.

7.Reinstall the air cleaner case into the air cleaner body by putting the hooks on the bottom of the air cleaner case into the air cleaner body bottom.

8009-446

8009-447

8009-448

8009-450

8009-452

26 – English

Page 28
Image 28
Husqvarna Rider 15V2 manual Replacing the air filter, Varning